Keywords:
Bidding extended on Open items for 2 minutes since last bid.
Category: ALL (647 records) November 2020 Machine Tool Marketplace Online Auction - Closes November 19th Starting at 10:00am CT
Previous page Next page

Item Photo Description Bids High
Bidder
Current
Amount
Next Bid
Required
Your
Bid
Your
Maximum
1  Covid-19 All Winning Bidders MUST Schedule a Pickup Time in Advance to Limit Contact and Wait times. Please Make Other Arrangements to Pick Up If You're Feeling Ill. Call Greg @ (612) 325-2158 to Schedule.        
ended
1
thumb_DSC07827G.JPGEnco Model 105-1110 Milling and Drilling Machine with 5" Machine Vise, Travels: Front to Back: 7", Side to Side: 17", Quill: 5", R8 Spindle, (8) Belted Speeds: 120-2500 rpm, Worklights, Includes Vice Handle and Quill Handles, Mounted on Cabinet, 2 HP, 115 Volt, Approx. 43"x32"x76" and 750 lbs. 13 36663 1,001.00  
ended
2
thumb_DSC08152G.JPGValley Craft Verso-Lift Model 7803 Drum Positioner, Capacity: 1,000 lbs., 3"x21-1/2" Forks, 115 Volt, Approx. 36"x42"x91" and 400 lbs. 7 35655 185.01  
ended
3
thumb_DSC06797G.JPGDake No. 1 Arbor Press, 11-1/2" Max. Work Height, 7" Throat. 16 35544 101.11  
ended
3 1 thumb_15BP.jpgTerms: Premier Machinery Auctions will charge a 15% Buyer's Premium on all items at this sale as Well as Local Sales Tax. All Items are Sold AS IS/Where IS and with All Faults. Please Carefully Inspect Items Before Bidding. Bidders Outside of the United States May be Required to Place a Deposit to Bid.        
ended
3 2 thumb_PREVIEW_BTD2.jpgPreview: Preview will be Daily by Appointment Only and Open Preview Day on Wednesday, November 18th from 8:00 am to 4:00 pm. Call Jim @ (612) 991-7008 to Schedule. Site Address: 2130 107th Lane NE, Suite 200, Blaine MN 55449        
ended
3 3 thumb_rigger22.jpgRemoval: Loadout of Small Machinery will be Done by Premier Machinery Auctions at No Expense. Machinery over 4,500 lbs and Offsite will Require a Rigger. These Lots will Show Rigging Info. Site Address: 2130 107th Lane NE, Suite 200, Blaine MN 55449        
ended
3 4 thumb_ups.jpgShipping: Premier Machinery Auctions Can Ship Small Items up to 150 lbs Through UPS. Premier Machinery Auctions will Charge a Fee for This Service.        
ended
3 5 thumb_4lpm.jpgAuction Close: This Auction Ends on Thursday, November 19th Beginning at 10:00 am CST. The Sale will Close at a Rate of (4) Lots Per Minute. Each Lot has a running countdown clock but may lag behind on some browsers. Please Refresh your Screen Periodically to Avoid any Possible Issues.        
ended
3 7 thumb_removal.jpgCheckout: Removal for This Auction Will be Friday, November 20th from 8:00 to 4:00, Monday, November 23rd from 8:00 to 4:00 and Tuesday November 24th for 8:00 to 4:00. We Will be Setting up Another Auction Immediately After this Auction and ALL Items MUST be Paid for and Picked up by Tuesday November 24th. We Ask That You Do Not Bid if You Are Unable to Do So as NO Exceptions Will be Made. All Items Left After Tuesday, November 24th Will be Charged an Additional Fee of $20 Per Day. Site Address: 2130 107th Lane NE, Suite 200, Blaine MN 55449        
ended
4
thumb_DSC07130G.JPGMitutoyo Code 505-677 12" Caliper in Case, .001" Graduation. 5 35298 60.00  
ended
5
thumb_DSC06686G.JPGTrumpf No. 1804593 LLK-A/B 015 10m Fiber Beam Delivery Cable. 10 35222 55.00  
ended
6
thumb_DSC02871.JPG(21) Mostly New Valenite Indexable Endmills and Cutting Tools, See Photos For Part Numbers and Details. 10 20620 61.00  
ended
7
thumb_DSC06973G.JPGNewport Drilled/Tapped Fixture Table with Dampening Pads and Right Angle Fixture Plate, Table: 48"x30", Right Angle: 40"x5-1/2", Metal Lower Shelf, Table is 32-1/2" in Height. 29 36681 776.55  
ended
8
thumb_DSC02620.JPGStanny Model NBH 2084, BT40 Adjustable Boring head Tool Holder , 3/4" Holes and Includes (8) 3/4" Shank Insert Type Boring Bars and Case. 9 17353 111.99  
ended
9
thumb_IMG_5782.JPGUline Model H-4175M-Y Flammable Storage Cabinet. 12-Gallon Capacity, 43" x 18" x 18" Overall. 15 35006 200.00  
ended
10
thumb_DSC07849G.JPGJet Model FS-1652N Foot Shear, Capacity: 16 ga. X 52", Manual Back Gauge, s/n: 106615, Approx. 62"x66"x41". 17 36393 1,100.00  
ended
11
thumb_DSC03022.JPGAutomation/MRO Components Including (1) New Kollmorgen Model AKD-P0060G-NBAN-0000 Servo Systems Driver, (1) Parker Model Zeta 4 Drive Compumotor, (1) Parker Model GV6-U6E Gemini Servo Driver, Servo Motors Including (1) New Kollmorgen Model AKM22E-ENDNC-00 Servo Motor, (1) Staubli J+6 Motor w/ Encoder, (2) Servo Gear Head Reducers, and More Shown, See Photos For Details. 25 36371 411.00  
ended
12
thumb_DSC07190G.JPG(5) 0-1" Micrometers, (4) Starrett of which (3) are Carbide Tipped and .0001" Graduation, (1) Unknown Mfg. 4 35528 25.00  
ended
13
thumb_DSC02372.JPG(2) Starrett No. 483 V. Micrometers, (1) 0-1", (1) 1-2", Both w/ Carbide Tips, Ratcheting, .001" Grad. 8 35298 65.89  
ended
14
thumb_IMG_5687.JPGRosseau 7-Drawer Cabinet. 30" x 30" x 46" Overall. 17 36681 310.00  
ended
15
thumb_IMG_5730.JPGWEN Industries Model TR-900 Fluid Transfer Cart. (2) 34-Gallon Tanks. (1) Isopropyl Alcohol, (1) Waste Isopropyl Alcohol. Air Powered, 45" x 24" x 66" Overall. 10 36595 77.22  
ended
16
thumb_DSC02925.JPGKeyence Model CV-551 Operator Interface Panel w/ Keyence CV-050 Camera, Assorted Lenses, Right Angle Stem Lens w/ Fiberoptic Lighting, Extension Tubes and More. 9 36622 83.00  
ended
17
thumb_DSC06941G.JPGScientific Technologies Safety Light Curtain System Including Model LCC-FB-A01-U Controller, Model MS4332 BR - MS4300 Series Receiver Bar, Model MS4332BX - Xmtr Bar and (2) Banner Model OTBVN6QD Optical Touch Buttons. 7 35070 90.00  
ended
18
thumb_DSC02665.JPG(2) Federal Dimensionair Air Gauges, (1) Model D-2500, .00005" Grad., (1) Model D-4000, .000025" Grad. 19 35191 205.00  
ended
19
thumb_IMG_5740.JPGDelta Model 34-441 10" Contractors Saw, Delta Unifence Guide, Jessen Tool Co. Router Plate, 32" x 27" Custom Table Extension, 1-1/2 hp, 115/230 volt, 1-phase, s/n: 92F33947, Approx. 64" x 48" x 42" Overall. 11 36393 260.00  
ended
20
thumb_DSC01733.JPGScotchman Type VS-350LI/PK/PD Cold Saw, S/N: B84840908, Pneumatic Downfeed, Manual Clamping w/ Pneumatic Assist, Approx. 12" Blade Dia. 10' Feed Table, Foot Switch, 39"x51"x58" Main Unit Dimensions. Note: Last Day Removal Only. 15 36284 626.12  
ended
21
thumb_DSC01646.JPG(2) Snap-On/Blue Point Impact Guns, (1) 3/8", (1) 1/2". 11 36292 35.00  
ended
22
thumb_DSC01666.JPG(14) SGS Solid Carbide 2 Flute 1/2" Dia. Endmills. 10 35997 70.00  
ended
23
thumb_DSC06457G.JPG(3) Siemens Sinamics G120C DP No. 6SL3210-1KE21-7UP1 Drive Frequency, Appear Unused. 30 35070 501.00  
ended
24
thumb_DSC01552.JPG(6) Jacobs Straight Shank Drill Chucks, (1) No. 30, (1) No. 2B, (1) 2A, (1) 34-02, (1) 6A, (1) 14N, Shank Dia. From 1/2" Up to 1". 8 35528 25.00  
ended
25
thumb_DSC01784.JPGChowel Model RAS-35A-14 Spot Welder, 23-1/2" Throat, 9-1/2" Distance Between 23"x 2-1/4" Dia. Arms. Foot Pedal Control, 35 KVA Rated Cap. @ 50% Duty Cycle, 230V. Input, 16200 A. Max Output Short Current, 1184 Lb. Max Electrode Force, Overall: 18"x50"x50" and 518 Lbs. See Photos For Additional Details, *Unit Mounted to Custom Built 1/2" Thick Steel Plate Base. 9 36620 262.00  
ended
26
thumb_DSC06764G.JPGDumore Catalog No. 5-021 Tool Post Grinder, 115 Volt. 8 35111 75.00  
ended
27
thumb_DSC07012G.JPG(15) Assorted #2 & 3 Morse Taper Drills, Some Extra Long, 5/8" to 55/64" Diameters. 7 35528 47.50  
ended
28
thumb_DSC07024G.JPG(10) Meridian and/or Herman Miller 2-Drawer Filing Cabinets, No Keys, Approx. 15"x22"x25-3/4". Note: Last Day Removal Only. 4 35009 4.00  
ended
29
thumb_IMG_5703.JPGBlack Diamond Model 2B Precision Drill Grinder. 1/16" to 1/2" Range, 7" Wheel Diameter, Collet Set, 1/3 hp, 115 volt, 19" x 15" x 52" Overall. 7 35022 260.00  
ended
30
thumb_DSC07873G.JPGSheldon Machine Company Lathe, Model NA, Approx. 12" Swing Over Bed, Approx. 7" Swing Over Cross Slide, Approx. 10" Swing Over Saddle, 33" Long Bed, Tail Stock, 5C Collet Chuck, 220 Volt, Single Phase, Approx. 62"x27"x54".
Click Lot for Video of this Machine.
22 36670 649.00  
ended
30 1
thumb_IMG_4919.JPG2011 Nissan Altima SR. 3.5 L V6 Engine, Auto Transmission with "Auto-Stick", Moon Roof, New Tires and Rims as of Last Fall, Heated Leather Seats, Power Driver Seat, Power Windows, Locks, Bose Sound System, (2) Key Fobs, Push Button Ignition, Dual Exhaust, Odometer Reads: 213,XXX, VIN: 1N4B L2AP8BC121695.Title and Lien Release In Hand. Note: Vehicle being Re-Listed Due to Non-Payment From Previous Auction. Click on Lot for Video 12 35528 2,700.00  
ended
31
thumb_DSC01485.JPG(2) New Spools of 5/8" Poly Banding Material. 9 1462 35.51  
ended
32
thumb_DSC01362.JPG(10) HSK Type Specialty Tool Holders, Approx. 1-1/2" Dia. Shank, (6) 9-27925-40655, (3) 9-27931-40661, (1) 9-27931-40666, See Photos For Details. 6 35191 12.00  
ended
33
thumb_IMG_5712.JPG11-Drawer Tooling Cabinet with 22" H Riser Stand. 37" x 21" x 60" Overall. 17 36563 290.00  
ended
34
thumb_DSC07255G.JPGTitan Model 0521237 Helix Surefire Dual Heated Hose Assembly, 200 ft., New in Box. Note: Last Day Removal Only. 13 36497 341.00  
ended
35
thumb_DSC07947G.JPGDillon 5,000 lb. Dynamometer Scale, 20 lb. Divisions. 6 36637 80.00  
ended
36
thumb_DSC07123G.JPGAssorted Counter Bore and Radius Cutters, Straight and MT Shanks. 9 36563 27.50  
ended
37
thumb_DSC02157.JPG(11) Dumont Broaches, Sizes Include (1) 3/4-E, (1) 1/2-D, (1) 3/8, (1) 5/16-D, (1) 3/16-C, (4) .265-C Special, (1) 3/16-B, (1) 1/16-A. 8 34458 38.50  
ended
38
thumb_DSC01594.JPGSalvo Tool and Engineering Co. Screw Machine Rolling Tool Assemblies, and (1) Extra Roller Head Shown. 5 35046 10.00  
ended
39
thumb_DSC02145.JPG(3) Pneumatic Dynabrade Type Files, (1) Dynafile Model 14000, (1) Belton Model B-20B, (1) Belton Model B-20S. 8 35544 65.00  
ended
40
thumb_DSC07844G.JPG60" Apron Brake, Mfg and Model NA. 20 36674 420.00  
ended
41
thumb_DSC01600.JPG(4) Drill Chucks Including (1) Jacobs 18N 1/8" -3/4" Cap. On MT#4 Shank, (1) Jacobs 6A, 0-1/2" Cap. On MT#2 Shank, (1) Taiwan Made 1/32"-1/2" Cap On MT#2 Shank, and (1) Albrecht Type Keyless 3/32"-5/8" Cap. 5 35665 41.00  
ended
42
thumb_DSC01384.JPGPallet w/ Assorted Machine and Electrical Components Including: Capacitors From 200 Uf Up to Water Cooled GE Model Ajax 31194A50 750DCV, 2x250UF/Tap Transformer, Filters, Water Cooled Lines, Hardware, and More. 7 35222 28.50  
ended

Bidder number Password Increments

Select page to view:
p1